NeoPower Bio Neoprene Contact Adhesive
Safe. Strong. Sustainable.

NeoPower is a premium, high-solids, toluene-free bio neoprene contact adhesive designed with both user safety and environmental impact in mind. Proudly manufactured locally in Australia, this advanced adhesive features a low-odor formula for a more comfortable application experience compared to traditional adhesives. With a low VOC content, NeoPower ensures a healthier indoor environment without compromising on performance.

This adhesive provides exceptional bonding strength, making it ideal for a variety of applications, including laminates, automotive trims, foam rubber, upholstery, and more. Thanks to its higher solids concentration, NeoPower delivers impressive coverage, allowing you to use less adhesive for the same great results.

Key Features:

Made in Australia
Toluene-Free & Formaldehyde-Free
Low VOC for Healthier Air Quality
High Bond Strength for superior durability
Heat Resistance up to 160°C
Efficient Coverage: 11m² per litre
Water Resistant for added versatility
Technical Specifications:

Base: Neoprene
Colour: Natural (clear)
Pack Sizes: 1L, 5L, 15L, and 200L (special order)
Coverage Rate: 11m²/Litre
Viscosity: 500CPS
Total Solids: 17%
System Flammability: Flammable
Open Time: 30 minutes
Flash Off Time: 5 minutes
Heat Resistance: Up to 160°C
Applications:

General Purpose Laminating
Foam & Upholstery
Automotive Trimming & Headliners
Marine Carpeting
Flooring Installation
Application Instructions:

Ensure both surfaces to be bonded are clean and dry.
Apply adhesive evenly to both surfaces using a spray gun.
Allow the adhesive to evaporate until it is no longer tacky to the touch.
Join the surfaces within the open time (30 minutes) for a strong bond.
Apply firm pressure for optimal bond strength.
Ensure conditions such as temperature (do not use below 10°C) and humidity are suitable for effective bonding.
Please Note:

Adjust evaporation, open time, and press time based on the materials being bonded and workshop conditions.
Avoid application in areas with temperatures below 10°C to prevent condensation on the adhesive film.